Technical data

31
6 Maintenance
The IMPRESSA builds up deposits of limescale over time and auto-
matically prompts you to descale it when necessary. The degree of
calcification depends on the degree of hardness of your water.
If the descaling agent comes into contact with the skin or eyes, this
can cause irritation.
l Avoid contact with the skin or eyes.
l Rinse the descaling agent off with clean water. Should you get
any descaling agent in your eye, see a doctor.
If the wrong descaling agent is used, the machine could be dam-
aged and/or traces of detergent could be left behind in the water.
l Use only original JURA care products.
If the descaling operation is interrupted, it is possible that the
machine could be damaged.
l Allow the descaling program to run to the end.
If the descaling agent comes into contact with sensitive surfaces, the
possibility of damage cannot be excluded.
l Clean up any splashes immediately.
o The descaling program lasts approx. 40 minutes.
o Your dealer will stock JURA descaling tablets.
@ Try out the ‘Descaling the machine’ operation online. Visit the
Knowledge Builder on www.jura.com.
To descale your IMPRESSA when prompted to do so, you should
proceed as follows:
Precondition: the maintenance indicator and the
Descaling indi-
cator
b are lit up.
b l Hold down the Descaling button until the Descaling indi-
cator
b flashes.
The coffee grounds container indicator
x now flashes.
l Empty the drip tray and the coffee grounds container.
l Insert the empty drip tray and coffee grounds container
back in the machine.
Descaling the machine
CAUTION
CAUTION
CAUTION
CAUTION
Descaling following
a prompt