Technical data

29
6 Maintenance
l Place a receptacle (containing at least 500 ml) under the
Easy Cappuccino Frother.
l If the milk pipe is connected, remove it.
n l Hold down the Filter button until the Filter indicator n
flashes.
The light segment by the switch will now flash.
r l Turn the switch in the anticlockwise direction.
Rinsing of the filter will now begin. The light segment by the
switch will now light up.
o You can interrupt rinsing of the filter at any time. To do this,
turn the switch clockwise. Turn the switch anticlockwise to
continue rinsing the filter.
o The water could be slightly discoloured. This is not harmful to
health, nor does it affect the taste.
Rinsing of the filter will automatically stop after approx.
500 ml, and the light segment by the switch will then flash.
t l Turn the switch in the clockwise direction.
The Maintenance symbol
h flashes, the IMPRESSA heats up
and is once again ready for use.
You can initiate the ‘Changing the filter’ operation manually. Start
when the first prompt appears
l, as described under ‘Replacement
following a prompt’.
After dispensing 200 cups of coffee or performing 80 switch-on
rinses, the IMPRESSA will prompt you to clean it.
If the wrong cleaning agent is used, the machine could be damaged
and/or traces of detergent could be left behind in the water.
l Use only original JURA care products.
o The cleaning program only lasts about 15 minutes.
o Do not interrupt the cleaning program, as this will impair the
quality of cleaning.
o Your dealer will stock JURA cleaning tablets.
Manual filter change
Cleaning the machine
CAUTION