Technical data

28
6 Maintenance
Precondition: the IMPRESSA is ready for use.
l Place a receptacle under the coffee spout.
ä l Turn the Rotary Switch so that it points to the Maintenance
symbol
h .
m l Press the Rotary Switch to start the rinse operation.
The rinse operation now starts and the Maintenance
symbol
h flashes.
Rinsing stops automatically.
Your IMPRESSA is ready for use.
o After 50 litres of water have been dispensed, the filter will
cease to work. Your IMPRESSA will automatically prompt you
to replace the filter.
o After two months, the filter will cease to work. Monitor the
elapsed time as shown on the date plate on the cartridge
holder.
o If the CLARIS filter cartridge is not activated, you will not be
prompted to change the filter.
To change the CLARIS filter cartridge when prompted to do so by
your IMPRESSA, you should proceed as follows:
Precondition: the Maintenance indicator and the Filter indicator
n
are illuminated.
l Remove the water tank and empty it.
l Lift the cartridge holder.
l Take out the old CLARIS filter cartridge.
l Insert the new CLARIS filter cartridge into the water tank,
pressing it lightly.
l Close the cartridge holder.
It will lock into place audibly.
l Fill the water tank with cold, fresh mains water and
reinsert.
Changing the filter
Replacement following a
prompt