Technical data

23
4 Preparing drinks at the touch of a button
o If you have added too little pre-ground coffee, the IMPRESSA
will come to a halt ready for further use.
Example: proceed as follows to prepare a cup of coffee using pre-
ground coffee.
l Take the measuring spoon for pre-ground coffee out of the
Welcome Pack.
ä l Turn the Rotary Switch so that it points to the pre-ground
coffee symbol
j.
m l Press the Rotary Switch to confirm your choice.
The pre-ground coffee symbol
j will flash.
l Place a cup under the coffee spout.
l Open the filler funnel for pre-ground coffee.
l Place one level measuring spoon of pre-ground coffee in the
filler funnel.
ä l Turn the Rotary Switch to the 1 coffee setting d.
m l Press the Rotary Switch to initiate preparation of the coffee.
The symbols for pre-ground coffee
j and 1 coffee d will
flash, and the pre-configured amount of water will flow into
the cup.
Drink preparation stops automatically.
To prepare two cups of pre-ground coffee, place two cups under
the coffee spout, add two level measuring spoons of pre-ground
coffee to the filler funnel, turn the Rotary Switch to the symbol for
2 coffees
f and then press to initiate preparation of the coffee.