Technical data

22
4 Preparing drinks at the touch of a button
l Place a cup under the Easy Cappuccino Frother.
ä l Turn the Rotary Switch so that it points to the Steam
symbol
k.
m l Press the Rotary Switch to confirm your choice.
The Steam symbol
k will continue flashing until the
IMPRESSA has warmed up. As soon as the required temper-
ature has been reached, the light segment by the switch will
flash.
r l Turn the switch in the anticlockwise direction.
The milk foam will be prepared.
t l Turn the switch in the clockwise direction when there is
sufficient milk foam in the cup.
o As long as the light segment continues to flash on the switch,
you can continue preparing milk foam.
l Move the cup under the coffee spout.
ä l Turn the Rotary Switch to the 1 Espresso setting a.
m l Press the Rotary Switch to initiate preparation of the
Espresso.
The 1 Espresso symbol
a will now flash, and the pre-set
amount of water will flow into the cup.
Drink preparation stops automatically.
To ensure that the Easy Cappuccino Frother works perfectly, you
should clean it regularly. For further information on cleaning, see
Chapter 6, ‘Maintenance
– cleaning the Easy Cappuccino Frother’.
You can choose a second variety of coffee with the filler funnel for
pre-ground coffee.
All coffee specialities using pre-ground coffee are prepared in the
same way.
o Never add more than two level measuring spoons of pre-
ground coffee.
o Use pre-ground coffee which is not ground too finely. Very
fine coffee can block up the system so that the coffee only
comes out in drips.
Pre-ground coffee