Technical data

14
2 Preparing and using your IMPRESSA for the first time
l Place a receptacle (containing at least 500 ml) under the
Easy Cappuccino Frother.
l If the milk pipe is connected, remove it.
r l Turn the switch in the anticlockwise direction.
Rinsing of the filter will now begin. The light segment by the
switch will light up.
o You can interrupt rinsing of the filter at any time. To do this,
turn the switch clockwise. Turn the switch anticlockwise to
continue rinsing the filter.
o The water could be slightly discoloured. This is not harmful to
health, nor does it affect the taste.
Rinsing of the filter will automatically stop after approx.
500 ml, and the light segment by the switch will then flash.
t l Turn the switch in the clockwise direction.
As long as the machine is heating up, the Maintenance sym-
bol
h will flash. The IMPRESSA is ready for use again. The
filter is now activated.