Technical data

12
2 Preparing and using your IMPRESSA for the first time
l Fill the bean container with coffee beans, then close the
aroma preservation cover and the bean container cover.
If the machine is operated with a defective power cable, there is a
danger of electric shock.
l Never use a machine which has a defective power cable.
Precondition: the water tank must be full.
l Remove the protective film from the symbol display.
l Insert the mains plug into a power socket.
G l Press the On/Off button to switch the IMPRESSA on.
The light segment by the switch will now flash.
l Place a receptacle under the Easy Cappuccino Frother.
r l Turn the switch in the anticlockwise direction.
The light segment by the switch will now light up. The system
will now be filled with water. A small amount of water will
flow out of the Easy Cappuccino Frother.
The operation stops automatically. The light segment by the
switch will now flash.
t l Turn the switch in the clockwise direction.
As long as the machine is heating up, the Maintenance
symbol
h will flash. The Maintenance symbol h lights up.
l Place a receptacle under the coffee spout.
m l Press the Rotary Switch.
The machine will rinse itself, stopping automatically.
The 1 Espresso symbol
a will light up indicating that your
IMPRESSA is ready to use.
o After the first time that a coffee speciality has been prepared,
you may find that the maintenance indicator and the bean
container
c display flash if the grinder has not yet been filled
with coffee beans. In that case, prepare a different coffee
speciality.
First-time use
WARNING