froth tec • Operating Instructions • Warranty ™ Visit www.capresso.com for fun and delicious milk frother recipes.
Read all instructions before operating the appliance. IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: • Read all instructions. • After having the packaging removed, check that the appliance is intact. If in doubt do not use the appliance and contact your sales agent. • The parts of the packaging, plastic bags etc. must not be left within the reach of children as they are potential sources of danger.
SPECIAL CORD SET INSTRUCTIONS Regarding your Cord Set: A. A short power-supply cord (or detachable power-supply cord) is provided to reduce risks resulting from becoming entangled in or tripping over a longer cord. B. Longer detachable power-supply cords or extension cords are available and may be used if care is exercised in their use. C. If an extension cord is used, a. the marked electrical rating of the extension cord should be at least as great as the electrical rating of the appliance, and b.
Fig. 1 Lid Frothing Disk Froth Enhancer Glass Milk Pitcher Fill Markings HEAT FROTH MIN Base Operating Buttons (from left to right): cold, warm, hot Built-in storage drawer for disk Fig. 1a Froth Enhancer 4.
Using the froth TEC™ The froth TEC™ Automatic Milk Frother comes equipped with a glass milk pitcher with lid, a froth enhancer, one frothing disk, one heating disk and the base unit. One of the disks is installed onto the froth enhancer inside the milk pitcher. The other disk is stored in the drawer that slides out of the front of the base of the appliance. Froth enhancer (disk holder) Holds frothing or heating disk in place and enhances mixing power.
Usage 1. Plug in appliance. 2. Remove lid from milk pitcher. (A) 3. Place frothing disk or heating disk onto the pin of the froth enhancer. (B) 4. Place the froth enhancer into the bottom of the milk pitcher (C). Align the 3 tall tabs of the froth enhancer with the 3 curved panels at the bottom of the milk pitcher and make sure it snaps in securely (D). 5. Make sure underside of the milk pitcher is dry. 6. Pour fresh cold milk into the milk pitcher. (E) 7. Replace lid and place pitcher on heating platform.
Please note: • When you remove the milk pitcher from the appliance during operation, the item will automatically shut off. When replacing the pitcher, you need to push one of the three buttons to start it again. • If the heating plate or the bottom of the milk pitcher is still hot, the appliance will not turn on and will alert you by the 3 LEDs flashing together. In this case, remove the milk pitcher. Cool it down by running it under cold water. Make sure the underside bottom is dry and start over.
LIMITED WARRANTY This warranty covers your CAPRESSO machine, model #206. The model # can be found on the bottom of the machine. This warranty is in effect for one year from the date of the first consumer purchase. This warranty covers all defects in materials or workmanship (parts and labor). The warranty does not cover: • Any machine not purchased from an Authorized Capresso Dealer. • Commercial use of the machine.
