User Guide

O) Using the
frothXpress
PLUS system
The frothXpress PLUS
is separately available
for the F9.This system
siphons milk and
automatically produces
preprogrammed
amounts of hot frothed
or hot steamed milk
right into your cups,
never wasting any milk!
1. Disconnect the Dual-
Frother PLUS from the
steam nozzle (turn to
loosen and pull down
to remove).
2. Fill milk container with milk and assemble milk container
(see above). Attach the frothXpress to the steam nozzle.
Attach the milk container to the frothXpress (see above).
Important: Make sure all parts are connected tightly, other
wise siphoning does not work.
3. Set the dial to the (–) minus sign (12 o’clock) of the frothing
range for cappuccino or to the (–) minus sign (6 o’clock)
of the steaming range for latte.
4. Place cup underneath the frother.
5. Push the
STEAM button. The button’s red light starts
blinking. YOUR MACHINE IS HEATING. After ~ 20 sec.:
SELECT PRODUCT.
6. Push the
STEAM button again. STEAM PORTION. The F9
will create hot frothed or steamed milk right in your cup .
When you have enough milk in your cup push the STEAM
button to stop.
7. If you like more frothed milk push the
STEAM button again.
8. For hotter milk in either position move the dial more
towards the (+) plus symbols.
(The extra long hose lets you siphon milk from any carton
without using the special milk container.)
Tip: Use Chocolate milk to make great Hot Chocolate!
P) Cleaning the frothXpress PLUS system
Should be done right after use, takes less than 30 seconds.
• Store the milk container in the refrigerator and remove the
frothXpress from the steam nozzle.
• Drop the hose and the frothXpress in a cup of hot water.
This will push out any milk r
esidue and pr
events milk fr
om
har
dening inside the system.
•
Place a cup under
neath the steam nozzle and push the
HOT WATER button for three seconds.
•
Replace fr
othXpr
ess system.
1
2
3
f
rothXpress
Plus
attached
M
ilk
Container
A
ssembly
Frothing
r
ange
Steaming
range
Steam only
no
siphoning
D
IAL
+
+
_
_