User Guide
Important: If you use the Claris filter and the above
m
essage appears then the Claris activation was not
performed. Repeat all steps of Chapter J. This will turn
off the decalcifying monitor.
Important: Never interrupt the decalcifying program.
• Use only the special decalcifying tablets (not the
cleaning tablets!). For supplies see below.
1. Turn the F9 off and let cool down for one hour.
Push and hold the RINSE button until display shows
EMPTY TRAY.
2. Remove and empty tray. You must remove the tray
for 20 seconds even if it is empty. Replace tray.
Decalcifying Session:
3. AGENT IN TANK / PRESS MAINT. Dissolve three
large square tablets in 16 oz. of water and pour
mixture into water tank. Place a container (at least
16 oz.) under frother.
4. Push the
RINSE button. MACHINE DESCALED.
After a few minutes: EMPTY TRAY. Carefully
remove cup and tray, empty and replace.
Cleaning Session:
5. FILL WATER. Rinse water tank and fill with cold
water (16 oz.) and replace. Place a container under
the frother.
6.
PRESS MAINT. FILL WATER. Push the RINSE
button. MACHINE DESCALED. After a few minutes:
EMPTY TRAY. Carefully remove cup and tray, empty
and replace.
7.
PRESS MAINT. Push the RINSE button. The F9
returns to SELECT PRODUCT and resets itself.
8. Clean the chrome front and grid with a moist, soft
cloth.
CAPRESSO CUSTOMER SERVICE
1-800-220-5701
M-F 9AM - 9PM; Sat. 9AM - 5PM EST
FAX: 201-767-9684
contact@capresso.com
N) Supplies
Order through Customer Service or Mail Order Form or
www.capresso.com:
• Claris W
ater Filter Car
tridge: #7520
• Special Cleaning Tablets: #1151 or #62205 or
#62535
• Decalcifying T
ablets: #61848
• Grand Aroma Coffee Beans: #921