Technical data

28
ENA 5
y T Turn the switch to position o.
DE-SCALING, the descaling operation
is continued.
EMPTY TRAY
Empty the coffee grounds container and
drip tray and replace.
Reattach the nozzle to the Connector
System
©
.
READY
Descaling the machine – manually
The ‘Descale machine’ operation can be manually
initiated.
Precondition:
READY appears on the display.
Open the cover behind the Rotary Switch.
P T Press the P button until MAINTENANCE
appears.
k T Press the Rotary Switch to enter the
programme item.
RINSE
g T Turn the Rotary Switch until DE-SCALE
is displayed.
k T Press the Rotary Switch.
EMPTY TRAY
Continue with the third prompt to take
action (indicated by
T), as described in the
section ‘Descaling the machine following
a prompt’.
Rinsing the Professional Cappuccino Frother
To ensure that the Professional Cappuccino
Frother works perfectly, you should rinse it with
water whenever you have prepared some milk.
The ENA will not prompt you to rinse the
Professional Cappuccino Frother.
Remove the milk pipe from the milk carton
or milk container.
Fill a receptacle with fresh water and
immerse the milk pipe in the water.
T
T
T
T
E
T
T
Place another receptacle under the nozzle.
Set the selector lever of the nozzle to the
milk foam
p or milk t position.
g T Turn the Rotary Switch until STEAM is
displayed.
k T Press the Rotary Switch.
HEATING
READY appears as soon as the ENA is
sufficiently heated.
l T Turn the switch to position m.
STEAM, the nozzle and pipe are rinsed.
y T Turn the switch to position o as soon as
clean water flows into the receptacle.
Cleaning the Professional Cappuccino Frother
To ensure that the Professional Cappuccino
Frother works perfectly, you should clean it daily
when you have been preparing milk.
CAUTION
If the wrong cleaning agent is used, the machine
could be damaged and/or detergent residues
could be left in the water.
Only use original JURA care products.
The ENA will not prompt you to clean the
Professional Cappuccino Frother.
The JURA Auto-Cappuccino Cleaner is
available from stockists.
Remove the milk pipe from the milk carton
or milk container.
Pour 250 ml of fresh water into a receptacle
and add one capful (max. 15 ml) of the
Auto-Cappuccino Cleaner.
T
T
T
E
E
T
T