Technical data

26
ENA 5
The cleaning programme only lasts about
15 minutes.
Do not interrupt the cleaning programme.
The quality of cleaning will be impaired if
you do so.
JURA cleaning tablets are available from
stockists.
Precondition:
CLEAN / READY is displayed.
Open the cover behind the Rotary Switch.
c T Press the maintenance button.
EMPTY TRAY
Empty the coffee grounds container and
drip tray and replace.
PRESS ROTARY
Turn the coffee spout to the cleaning
position.
Place a receptacle under the coffee spout.
k T Press the Rotary Switch to start cleaning.
CLEANING, water flows out of the
coffee spout.
The process is interrupted.
ADD TABLET
Open the powder chute for for pre-ground
coffee and drop in a JURA cleaning tablet.
E
E
E
T
T
T
T
T
Close the powder chute for pre-ground
coffee.
PRESS ROTARY
k T Press the Rotary Switch.
CLEANING, water flows out of the
coffee spout several times.
EMPTY TRAY
Empty the coffee grounds container and
drip tray and replace.
READY
Turn the coffee spout to the 1 cup or 2 cup
position.
Cleaning the machine – manually
The ‘Clean machine’ operation can be manually
initiated.
Precondition:
READY appears on the display.
Open the cover behind the Rotary Switch.
P T Press the P button until MAINTENANCE
appears.
k T Press the Rotary Switch to enter the
programme item.
RINSE
g T Turn the Rotary Switch until CLEAN is
displayed.
k T Press the Rotary Switch.
EMPTY TRAY
Continue with the third prompt to take
action (indicated by
T), as described in the
section ‘Cleaning the machine following
a prompt’.
T
T
T
T
T