Technical data

21
ENA 5
g T Turn the Rotary Switch until STEAM is
displayed.
k T Press the Rotary Switch.
HEATING
READY
appears as soon as the ENA is
sufficiently heated.
l T Turn the switch to position m.
STEAM, the hot milk is being prepared.
y T Turn the switch clockwise to position o
when there is sufficient milk in the cup.
You can prepare more hot milk within
about 40 seconds.
To ensure that the Professional Cappuccino
Frother works perfectly, it should be rinsed
and cleaned regularly (refer to Chapter 4
‘Maintenance – Professional Cappuccino
Frother’).
Heating milk with the 2-stage frothing
nozzle
Precondition: READY appears on the display.
Push the 2-stage frothing nozzle to the top
position.
Place a cup of milk below the 2-stage
frothing nozzle and immerse the nozzle in
the milk.
If the nozzle does not reach into the cup, lift
the cup towards the nozzle.
g T Turn the Rotary Switch until STEAM is
displayed.
E
T
T
E
k T Press the Rotary Switch.
HEATING
READY
appears as soon as the ENA is
sufficiently heated.
l T Turn the switch to position m.
STEAM, the milk is heated by the hot
steam.
y T Turn the switch to position o as soon as
the required temperature is reached.
You can prepare more steam within about
40 seconds.
To ensure that the 2-stage frothing
nozzle works perfectly, it should be
rinsed regularly (refer to Chapter 4
‘Maintenance – Dismantling and rinsing
the 2-stage frothing nozzle’).
Hot water
To prepare hot water, attach either the hot
water nozzle or the 2-stage frothing nozzle
to the Connector System
©
.
CAUTION
There is a danger of scalding from hot water
splashes.
Avoid direct contact with the skin.
Precondition:
READY appears on the display.
Place a cup under the nozzle.
l T Turn the switch to position m.
WATER, hot water flows into the cup.
y T Turn the switch clockwise when there is
sufficient water in the cup.
READY
E
E
J
T
T
de
fr
it
en
it