Technical data

19
ENA 5
Cappuccino with the
Professional Cappuccino Frother
Precondition: READY appears on the display
and the coffee spout is set to the 1 cup position.
Remove the protective cover from the
Professional Cappuccino Frother.
Connect the milk pipe to the nozzle.
Insert the other end of the milk pipe into a
milk carton or connect it to a milk
container.
Place a cup under the nozzle.
Set the selector lever of the nozzle to the
milk foam
p position.
g T Turn the Rotary Switch until STEAM is
displayed.
k T Press the Rotary Switch.
HEATING
READY appears as soon as the ENA is
sufficiently heated.
l T Turn the switch to position m.
STEAM, the milk foam is being prepared.
y T Turn the switch clockwise to position o
when there is sufficient milk foam in the
cup.
You can prepare more milk foam within
about 40 seconds.
Place the cup under the coffee spout.
k T Press the Rotary Switch to start coffee
preparation.
1 CUP, the pre-set amount of water
flows into the cup. Preparation stops
automatically.
T
T
T
T
T
E
T
To ensure that the Professional Cappuccino
Frother works perfectly, it should be rinsed
and cleaned regularly (refer to Chapter 4
‘Maintenance – Professional Cappuccino
Frother’).
Cappuccino with the
Easy Cappuccino Frother
Precondition: READY appears on the display
and the coffee spout is set at the 1 cup position.
Remove the protective cover from the
Easy Cappuccino Frother.
Connect the milk pipe to the nozzle.
Insert the other end of the milk pipe into a
milk carton or connect it to a milk
container.
Place a cup under the nozzle.
g T Turn the Rotary Switch until STEAM is
displayed.
k T Press the Rotary Switch.
HEATING
READY appears as soon as the ENA is
sufficiently heated.
l T Turn the switch to position m.
STEAM, the milk foam is being prepared.
y T Turn the switch clockwise to position o
when there is sufficient milk foam in the
cup.
You can prepare more milk foam within
about 40 seconds.
T
T
T
T
E
de
fr
it
en
it