Technical data

15
ENA 5
Example: Changing the water hardness from
16° dH to 25° dH.
Precondition:
READY appears on the display.
Open the cover behind the Rotary Switch.
P T Press the P button until MAINTENANCE
appears.
g T Turn the Rotary Switch until HARDNESS
is displayed.
k T Press the Rotary Switch to enter the
programme item.
16° dH
g T Turn the Rotary Switch until 25° dH is
displayed.
k T Press the Rotary Switch to confirm the
setting.
OK, the water hardness is then adjusted.
HARDNESS
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit program-
ming mode.
READY
Adjusting grinder
You can adjust the grinder continuously to suit
the roast of your coffee.
CAUTION
If you adjust the fineness of grind when the
grinder is not operating, the grinding wheel could
be damaged.
Only adjust the fineness of grind when the
grinder is running.
Our recommendations:
Select a fine setting for a light roast.
T
T
Z
Select a coarse setting for a darker roast.
Example: Adjusting the fineness of grind during
coffee preparation.
Place the cup under the coffee spout.
k T Press the Rotary Switch to start coffee
preparation.
Turn the fineness of the grinding wheel to
the desired position while the grinder is
running.
1 CUP, the pre-set amount of water
flows into the cup, preparation stops
automatically.
READY
Switching on the machine
When the ENA is switched on, a prompt to
perform a rinse operation automatically appears.
Q T Press the on/off button to switch the
ENA on.
HEATING
PRESS ROTARY
Place a receptacle under the coffee spout.
Z
T
T
T
de
fr
it
en
it