en it de Instructions for Use fr it The ‘ENA 5 Instructions for Use’ has been awarded the seal of approval by the independent German Technical Inspection Agency, TÜV SÜD, due to its easy-to-understand style, its thoroughness and coverage of safety aspects.
ENA 5 IMPORTANT SAFEGUARDS These safeguards apply for machines with UL safety test (see rating plate and chapter 9, ‘Technical data’). Follow the basic safety precautions When using electrical appliances, basic safety precautions should always be followed, to reduce the risk of fire, electric shock, and/or injury to persons, including the following: Z Read all instructions. Z Do not touch hot surfaces. Use handles or knobs.
ENA 5 c. If an extension cord is used, 1. the marked electrical rating of the extension cord should be at least as great as the electrical rating of the appliance, and 2. if the appliance is of the grounded type, the extension courd should be a grounding type 3-wire cord, and 3. the longer cord shall be arranged so that it will not drape over the counter top or tabletop where it can be pulled on by children of tripped over. Z Z Z As a safety feature, this plug will fit in a polarized outlet only one way.
ENA 5 Z Z NEVER DO (or you will void your warranty protection): Z Z Z Z 4 Keep your hands and the cord away from hot parts of the appliance during operation. Never clean with scouring powders or hard implements. Never fill instant coffee, chocolate mix etc. into the grinder or ground coffee funnel (grunder by-pass). It will damage the functioning of the brewing chamber. Never fill sugar coated coffee beans into the bean hopper. In case of doubt, call your dealer.
ENA 5 en it de fr it 5
ENA 5 Your ENA 5 IMPORTANT SAFEGUARDS 2 Control elements 8 Proper use 10 For your safety 10 Welcome to the world of JURA 11 JURA on the Internet .............................................................................................................................................11 Knowledge Builder ................................................................................................................................................11 Connector System© .......................................
ENA 5 Descaling following a prompt ........................................................................................................................... 27 Descaling the machine – manually ..................................................................................................................28 Rinsing the Professional Cappuccino Frother .................................................................................................28 Cleaning the Professional Cappuccino Frother ..........
ENA 5 Control elements 1 6 2 7 8 9 10 3 4 5 Figure: ENA 5 Blossom White 1 2 3 4 5 6 8 Water tank Powder chute for pre-ground coffee Coffee grounds container Drip tray Cup platform Bean container cover 7 l 8 9 10 Switch for hot water and steam preparation Connector System© for removable nozzles Easy Cappuccino Frother Rotating coffee spout
ENA 5 1 2 3 4 5 Figure: Open cover 6 7 1 Q 2 3 4 P 5 c 6 g 7 8 9 10 11 On/off button Grinding wheel Cover P button Maintenance button Rotary Switch Display Professional Cappuccino Frother Easy Cappuccino Frother 2-stage frothing nozzle Hot water nozzle 9 10 it de fr The following nozzles are available from stockists and can be fitted to the Connector System©: 8 en 11 it 9
ENA 5 Proper use The machine has been designed and built for domestic use. It should only be used to prepare coffee and to heat milk and water. Use for any other purpose will be deemed improper. JURA cannot accept any responsibility for the consequences of improper use. Keep this manual close to the ENA and pass it on to the next user if applicable. For your safety Please read and note the following important safety information carefully.
ENA 5 Risk to children and persons with limited capabilities in operating machines: Z The machine is not designed to be operated by children and persons with limited capabilities. Z The machine may only be used by persons who are able to operate the machine safely. Safe handling of the CLARIS plus filter cartridges: Z CLARIS plus filter cartridges should be kept out of the reach of children. Z Store the CLARIS plus filter cartridges in a dry place in the sealed package.
ENA 5 Z Easy Cappuccino Frother U Cappuccino 1 Preparing and using for the first time This chapter provides the information you need for trouble-free use of your ENA and gives you a step-by-step guide to preparing your ENA for your first coffee experience.
ENA 5 T Remove the water tank and rinse with cold k T Press the Rotary Switch to confirm the water. T Fill the water tank with cold, fresh water and replace the tank. language setting. Filling the bean container CAUTION Coffee beans which have been treated with additives (e.g. sugar), pre-ground or freeze-dried coffee will damage the grinder. T Only use untreated coffee beans to refill the bean container. OK, the language is then adjusted. OPEN TAP T Place a receptacle under the nozzle.
ENA 5 Using and activating filter Your ENA no longer requires descaling if you use CLARIS plus filter cartridges. E Perform the ‘Insert filter’ operation without interruptions. This will ensure optimum function of your ENA. E After two months the filter capacity is reached. The elapsed time can be checked with the date plate on the cartridge holder. Precondition: READY appears on the display. T Open the cover behind the Rotary Switch. P T Press the P button until RINSE appears.
ENA 5 Example: Changing the water hardness from 16° dH to 25° dH . Precondition: READY appears on the display. T Open the cover behind the Rotary Switch. P T Press the P button until MAINTENANCE appears. g T Turn the Rotary Switch until HARDNESS is displayed. k T Press the Rotary Switch to enter the programme item. 16° dH g T Turn the Rotary Switch until 25° dH is displayed. k T Press the Rotary Switch to confirm the setting. OK, the water hardness is then adjusted.
ENA 5 k T Press the Rotary Switch to start rinsing. RINSING, the system is being rinsed. The operation stops automatically. READY Switching off the machine When the ENA is switched off, the system is automatically rinsed if a coffee speciality has been prepared. T Place a receptacle under the coffee spout. T Turn the coffee spout to the cleaning position. Q T Press the on/off button. RINSING, the system is being rinsed, the operation stops automatically. The ENA is switched off.
ENA 5 Z Z Pre-heat your cups. Use a teaspoon for sugar and do not use sugar lumps, as they may spoil the crema or milk foam. k T Press the Rotary Switch to start coffee preparation. 2 CUPS, the pre-set amount of water flows into the cups, preparation stops automatically. READY 1 coffee at the touch of a button Precondition: READY appears on the display. T Turn the coffee spout to the 1 cup position. Pre-ground coffee You can also use a second coffee blend in the powder chute for pre-ground coffee.
ENA 5 T Place one level measuring spoon of pre-ground coffee into the filler funnel. T Remove the filler funnel. T Close the powder chute. 1 CUP k T Press the Rotary Switch to start coffee preparation. 1 CUP, the pre-set amount of water flows into the cup, preparation stops automatically. READY E It is also possible to prepare two cups of pre-ground coffee. To this purpose place two level measuring spoons of pre-ground coffee into the filler funnel.
ENA 5 Cappuccino with the Professional Cappuccino Frother Precondition: READY appears on the display and the coffee spout is set to the 1 cup position. T Remove the protective cover from the Professional Cappuccino Frother. T Connect the milk pipe to the nozzle. T Insert the other end of the milk pipe into a milk carton or connect it to a milk container. T Place a cup under the nozzle. T Set the selector lever of the nozzle to the milk foam p position.
ENA 5 T Place the cup under the coffee spout. k T Press the Rotary Switch to start the coffee preparation. 1 CUP, the pre-set amount of water flows into the cup. Preparation stops automatically. To ensure that the Easy Cappuccino Frother works perfectly, it should be rinsed and cleaned regularly (refer to Chapter 4 ‘Maintenance – Easy Cappuccino Frother’). y T Turn the switch to position o when the milk foam has reached the required consistency. E You can prepare more steam within about 40 seconds.
ENA 5 g T Turn the Rotary Switch until STEAM is k T Press the Rotary Switch. displayed. k T Press the Rotary Switch. HEATING READY appears as soon as the ENA is sufficiently heated. l T Turn the switch to position m. STEAM , the hot milk is being prepared. y T Turn the switch clockwise to position o HEATING READY appears as soon as the ENA is sufficiently heated. l T Turn the switch to position m. STEAM , the milk is heated by the hot steam.
ENA 5 3 Default settings in programming mode g T Turn the Rotary Switch until EXIT is displayed. k T Press the Rotary Switch to exit the Products The following settings can be programmed for 1 coffee: Z Amount of water: 15 ML – 240 ML Z Coffee strength: MILD, NORMAL , Z programme item. PRODUCT g T Turn the Rotary Switch until EXIT is displayed. k T Press the Rotary Switch to exit program- STRONG ming mode.
ENA 5 g T Turn the Rotary Switch until EXIT is Units of water displayed. k T Press the Rotary Switch to exit programming mode. The unit for the amount of water can be displayed in either ‘ml’ or ‘oz’. READY Automatic switch-off You can save energy with the automatic switchoff function on the ENA. E The automatic switch-off time can be adjusted between 0.5 and 9 hours or deactivated (--- HRS). Example: Changing the units of water from ML to OZ. Precondition: READY appears on the display.
ENA 5 Example: Changing the language from ENGLISH to FRANCAIS. Precondition: READY appears on the display. T Open the cover behind the Rotary Switch. P T Press the P button until MAINTENANCE appears. g T Turn the Rotary Switch until LANGUAGE is displayed. k T Press the Rotary Switch to enter the programme item. ENGLISH g T Turn the Rotary Switch until FRANCAIS U Wipe the surface of the machine with a damp cloth. U Rinse the nozzle regularly if it is used to warm or froth milk.
ENA 5 Changing the filter following a prompt E E E After 50 litres of water have flowed through the filter, its capacity is reached. The ENA automatically prompts you to replace the filter. After two months the filter capacity is reached. The elapsed time can be checked with the date plate on the cartridge holder. If the CLARIS plus filter cartridge is not activated, you will not be prompted to change the filter. Precondition: READY / FILTER is displayed. T Open the cover behind the Rotary Switch.
ENA 5 E E E The cleaning programme only lasts about 15 minutes. Do not interrupt the cleaning programme. The quality of cleaning will be impaired if you do so. JURA cleaning tablets are available from stockists. T Close the powder chute for pre-ground coffee. PRESS ROTARY k T Press the Rotary Switch. CLEANING, water flows out of the coffee spout several times. EMPTY TRAY T Empty the coffee grounds container and Precondition: CLEAN / READY is displayed. T Open the cover behind the Rotary Switch.
ENA 5 Descaling following a prompt The ENA builds up limescale deposits over time and automatically prompts you to descale the machine when necessary. The degree of build-up depends on the hardness of the water. T Remove and empty the water tank. T Completely dissolve the contents of one blister (3 JURA descaling tablets) in a container holding 500 ml of water. This may take several minutes. J CAUTION If the descaling agent comes into contact with the skin or eyes, this can cause irritation.
ENA 5 y T Turn the switch to position o. T Place another receptacle under the nozzle. T Set the selector lever of the nozzle to the milk foam p or milk t position. DE-SCALING, the descaling operation is continued. EMPTY TRAY T Empty the coffee grounds container and drip tray and replace. T Reattach the nozzle to the Connector System©. READY Descaling the machine – manually The ‘Descale machine’ operation can be manually initiated. g T Turn the Rotary Switch until STEAM is displayed.
ENA 5 T Immerse the milk pipe in the receptacle. T Place another receptacle under the nozzle. T Set the selector lever of the nozzle to the milk foam p or milk t position. Dismantling and rinsing the Professional Cappuccino Frother T Carefully remove the Professional Cappuccino Frother from the Connector System©. T Dismantle the frother completely. g T Turn the Rotary Switch until STEAM is T Rinse all parts thoroughly with running displayed. k T Press the Rotary Switch. water.
ENA 5 g T Turn the Rotary Switch until STEAM is g T Turn the Rotary Switch until STEAM is displayed. k T Press the Rotary Switch. k T Press the Rotary Switch. displayed. HEATING READY appears as soon as the ENA is HEATING READY appears as soon as the ENA is sufficiently heated. l T Turn the switch to position m. STEAM , the nozzle and pipe are rinsed. y T Turn the switch to position o as soon as sufficiently heated. l T Turn the switch to position m. STEAM , the nozzle and pipe are cleaned.
ENA 5 T Rinse all nozzle parts thoroughly with Removing foreign objects running water. T Reassemble the Easy Cappuccino Frother and attach it to the Connector System©. Even the highest-quality coffee beans can contain foreign objects. These can block the grinder. Dismantling and rinsing the 2-stage frothing nozzle To ensure the correct function of the 2-stage frothing nozzle, clean it regularly if you have heated or frothed milk. J CAUTION Danger of burns on the hot nozzle and nozzle connector.
ENA 5 T Place the finger guard into the bean container and screw tight. T Fill the bean container with fresh coffee beans, then close the bean container cover. Cleaning the bean container Coffee beans may be covered with a slight oil film which remains on the walls of the bean container. These residues may negatively affect the coffee results. For this reason clean the bean container from time to time.
ENA 5 Maintenance and storage The CLARIS plus filter cartridge only needs to be removed from the water tank if you are away for a prolonged period of time or if you wish to clean or descale the tank using a conventional product. If you do plan to be away for some time (e.g. on holiday), we recommend that you store the filter cartridge as follows: Remove the cartridge from the water tank. Place it in a glass with about two centimetres of water and put it in the fridge.
ENA 5 6 Display messages Message Cause/Result Action FILL WATER TANK The water tank is empty. You cannot prepare any coffee specialities, hot water or steam. T Fill the water tank (refer to The coffee grounds container is full. You cannot prepare any coffee specialities, but you can prepare hot water or steam. T Empty the coffee grounds TRAY MISSING The drip tray is not inserted correctly or is not inserted at all. You cannot prepare any coffee specialities, hot water or steam.
ENA 5 7 Troubleshooting Problem Cause/Result Action Grinder is making a very loud noise. There are foreign objects in the grinder. T Remove the foreign objects (see The nozzle does not produce enough milk foam. The nozzle is either in the wrong position or is dirty. T Adjust the position of the nozzle (refer Chapter 4, ‘Maintenance – Removing foreign objects’). to Chapter 2 ‘Preparation – Cappuccino’). T Rinse the nozzle (refer to Chapter 4 ‘Maintenance – Rinsing the nozzle’).
ENA 5 8 Transport and environmentally neutral disposal 9 Technical data E Transport/Emptying the system Keep the packaging of your ENA. It should be used to protect the machine during transportation. In order to protect the ENA from frost during transportation, the system must be emptied. Precondition: READY appears on the display. g T Turn the Rotary Switch until STEAM is displayed. k T Press the Rotary Switch. HEATING READY appears as soon as the ENA is sufficiently heated.
ENA 5 Voltage AS 230 V AC, 50 Hz 10 Contacts F 120 V AC, 60 Hz @ D 220 – 240 V AC, Contact information is available on the company website at www.jura.com. 50 Hz G 220 V AC, 50 Hz Power 1450 W Safety test SFDG Power consumption Approx. 13.5 Wh ECONOMY Power consumption Approx. 8 Wh ECONOMY p Pump pressure Static max. 15 bar Holding capacity of water tank 1.1 l Holding capacity of bean container 125 g Holding capacity of coffee grounds container Approx.
ENA 5 Index D Descaling JURA descaling tablets 27 Machine 27 Water tank 32 Dismantling and rinsing 2-stage frothing nozzle 31 Easy Cappuccino Frother 30 Professional Cappuccino Frother 29 Display 9 Messages 34 Disposal Environmentally neutral disposal 36 Drip tray 8 2-stage frothing nozzle 9 Dismantling and rinsing 31 3-colour plain text display 12 A Adjusting Energy-saving mode 22 Grinder 15 Language 23 Units of water 23 Automatic switch-off 23 B Barista tips 16 Bean container Cleaning 32 Filling 13
ENA 5 K S Knowledge Builder 11 Safety For your safety 10 Settings Default, in programming mode 22 One-off setting, before and during preparation 18 Setting up 12 Supplied as standard 12 Switch-off Automatic 23 Switch for hot water and steam preparation 8 Symbol description 7 System, emptying 36 M Machine Cleaning 25 Descaling 27 Rinsing 24 Switching off 16 Switching on 15 Maintenance 24 Cleaning the bean container 32 Cleaning the machine 25 Descaling the machine 27 Descaling the water tank 32 Removing f
ENA 5 Directives The machine complies with the following EU directives: Z 73/23/EEC of 19 February 1973, Low Voltage Directive including Amending Directive 93/68/EEC. Z 89/336/EEC of 3 May 1989, Electromagnetic Compatibility including Amending Directive 92/31/EEC. Technical changes We reserve the right to make technical changes. The illustrations used in the ENA 5 Instructions for Use show the ENA 5 Blossom White model. Your ENA could incorporate minor changes.
