Operating instructions

18b. PROGRAMMING TEMPERATURE
The factory setting is HIGH. You can change to NORMAL. In
NORMAL the temperature is approx. 7º F lower than in high.
• Press the P-Button.
• Touch the right arrow until the display shows TEMP. HIGH.
• Touch ST@RT.
• Touch the right arrow once: TEMP. NORMAL.
• Touch ST@RT to confirm.
• Press P button to return to SELECT PRODUCT.
18c. PROGRAMMING WATER QUANTITY (cup sizes)
Each of the three cup symbols (Fig. 5) in the touch screen
display can be set to any size from 30 and 240 ML (milliliters),
respectively 1 to 8 oz. (30 ML = 1 oz.). The factory settings for
the three cup symbols are:
BIG CUP: ............... 240 ML (8 oz.)
COFFEE (cup): ....... 150 ML (5 oz.)
ESPRESSO (cup): .. 60 ML (2 oz.)
• Press the P-Button.
• Touch the right arrow until the display shows WATER
QUANTITY.
• Touch ST@RT. The display shows SELECT PRODUCT
and illuminates the three cup symbols.
Please note: touch all three cup symbols and the display will
show you the actual cup size. e.g. BIG CUP 240 ML or
ESPRESSO 60 ML.
a. Touch the cup symbol for which you want to change the
size. e.g. ESPRESSO 60 ML.
b. Touch ST@RT. The number 60 starts blinking.
c. Use the right arrow to increase, the left arrow to decrease
the size. Push the arrow repeatedly, until the desired cup
size is displayed: e.g. ESPRESSO 45 ML (= 1
1
⁄2 oz.).
d. Touch ST@RT to confirm. The display shows WATER
QUANTITY. You can touch another cup symbol to change
that size (repeat steps a through d) or press the P Button to
return to SELECT PRODUCT.
18d. PROGRAMMING THE 1-CUP BUTTON
You can change the cup size for the 1-Cup Button (Fig. 3c).
Choose from 30 to 240 ML (= 1 to 8 oz.).
Please note: The 2-Cup Button automatically delivers twice as
much coffee.
The factory setting for the 1-Cup Button is 120 ML (4 oz.), for
the 2-Cup Button 240 ML (8 oz.).
• Press the P-Button.
• Touch the arrow until the display shows 1 CUP 120 ML.
• Touch ST@RT. The number 120 starts blinking.
• Touch the right or left arrow repeatedly until the desired
size is displayed.
• Touch ST@RT to confirm. The display lets you now select
the strength for the 1-CUP button.
• Touch the bean symbols to choose MILD, NORMAL or
STRONG.
• Touch ST@RT to confirm.
• Press the P Button to return to SELECT PRODUCT.
18e. PROGRAMMING STEAM PORTION
The steam portion can be programmed between 3 and 60
seconds. The factory setting is STEAM 60 SEC.
• Press the P-Button.
19.