Operating instructions

Important: If you choose the selection "–" the water hardness
monitor is turned off. In this case the machine will NOT remind
you when it is time to decalcify. Turning off the monitor requires
you to use distilled water only or the Claris Filter (chapter 16a).
If you use regular or bottled water the machine will build up
calcium. If calcium build-up inside the machine is not removed,
it can lead to a complete machine break down.
18. PROGRAMMING
Please note: As long as you are in programming mode, you
cannot brew coffee.
You can change a variety of functions. To get into programming
mode press and hold the P button (Fig. 3e). You will hear a beep
and two red arrows will appear in the touch screen display
panel, indicating that you are in programming mode.
The first screen will show:
< FILTER NO >
By repeatedly pushing the right arrow > the display shows all the
functions you can change or check:
WATER HARDNESS LEVEL 2
AROMA STRONG
TEMP. HIGH
WATER QUANTITY
1 CUP 150 ML
STEAM 60 SEC
WATER PORTION
TIME --:--
UNIT ON --:--
OFF AFT. 2 HRS
SUPPLIED ...
LANGUAGE ENGLISH
Changing the different functions works in the following pattern:
• Push and hold the P button, until the two red arrows show in
the display.
• Go to the function you want to program by repeatedly
pushing the left of right arrows.
• Touch ST@RT
• Change the function to the desired setting using either arrow.
• Confirm the new setting by touching ST@RT.
• Push the P button, to leave programming mode.
PROGRAMMING / ACTIVATING CLARIS FILTER
Activating the Claris Cartridge is explained in chapter 16a.
PROGRAMMING WATER HARDNESS
Changing the water hardness level is explained in chapter 17.
18a. PROGRAMMING AROMA
The factory setting is STRONG. You can change to NORMAL.
In NORMAL the Impressa F9 will grind a little less coffee in each
of the three strength selections (coffee bean symbols).
• Press the P-Button.
• Touch the right arrow symbol repeatedly until the display.
shows AROMA STRONG.
• Touch ST@RT.
• Touch the right arrow once: AROMA NORMAL.
• Touch ST@RT to confirm.
• Press P button to return to SELECT PRODUCT.
18.