Instruction manual

No steam produced from
the frothing wand.
Not enough froth when
frothing milk.
The Coffee/Steam switch is
not in the correct position.
The green ready indicator is
not illuminated.
Frothing wand blocked by
milk or calcium deposits.
Milk not fresh.
Milk not suitable.
Milk was too warm before
frothing began.
Not enough milk to froth.
Ensure the Coffee/Steam
switch is in the right,
steam/frothing “ ” position
Only after the Coffee/Steam
switch is in the steam posi-
tion and the ready indicator
is illuminated, the steam can
be used to froth.
Turn the Selector Dial to the
center "•" position. Carefully
use a needle to loosen the
milk residue. Then steam
again. See chapter 10,l to
clean the frothing tip. See
chapter 11 for decalcifying
the frothing wand.
Use the freshest milk possible.
Do not use milk that has
been opened for a few days
as this can affect the quality
of froth.
Non-dairy milks do not froth
as well as fresh, dairy milk.
Use cold, refrigerated milk
preferably at 34°F. Use a
cold stainless steel frothing
pitcher.
Use more cold milk inside of
a cold stainless steel frothing
pitcher.
Symptom Cause Corrections
Do not attempt to repair the appliance yourself.
Contact customer service or an authorized service facility for service
or repair
.
17.