Technical data

30
4 Permanent settings in programming mode
In the program item ‘Machine settings 1 (4/6)’ / ‘Factory setting’ you
can reset various settings to their factory settings:
U
‘Machine’
U
All customer settings (apart from the ‘filter’) are reset to
factory settings. Your IMPRESSA then switches off.
U
‘Products’
U
The settings (amount of water, aroma, temperature etc.) for
any product can be reset individually to the factory settings.
The corresponding double product is also reset to the fac-
tory settings at the same time.
U
‘All products’
U
The settings (amount of water, aroma, temperature etc.) for
all products are reset to the factory settings.
U
‘Display’
U
All display settings are reset to the factory settings.
Example: Proceed as follows to reset the values for ‘Espresso’ to the
factory settings.
Precondition: ‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/6)’
g T Turn the Rotary Switch until the program item ‘Machine set-
tings 1 (4/6)’ is displayed.
T Press the ‘Factory setting’ button.
‘Factory setting’
T Press the ‘Products’ button.
T Press the ‘Espresso’ button.
‘Espresso’ / ‘Reset this product to the factory setting?’
T Press the ‘Next’ button.
‘Saved’ appears briefly on the display.
‘Factory setting’
O T Press the P button to exit programming mode.
‘Please select product:’
Restore factory settings