Technical data

26
4 Permanent settings in programming mode
Product Temperature Coffee strength Amount
Latte
macchiato,
cappuccino
‘Normal’, ‘High’
(approx. 176–205 °F (80–96 °C))
‘extra-mild ;’,
‘mild ;;’,
‘normal ;;;’,
‘strong ;;;;’,
‘extra-strong ;;;;;’
Amount of milk:
‘3 sec.’ – ‘120 sec.’
Interval: ‘0 sec.’ – ‘60 sec.’
Volume: ‘0.5 oz’ – ‘8.0 oz’
(25 ml – 240 ml)
Milk portion – max. 149 °F (65 °C) – ‘3 sec.’ – ‘120 sec.’
Hot water ‘Low’, ‘Normal’, ‘X high’
(approx. 149–203 °F (65–95 °C))
– ‘0.5 oz’ – ‘15.0 oz’
(25 ml – 450 ml)
Example: Proceed as follows to change the amount of milk for a
latte macchiato from ‘16 sec.’ to ‘20 sec.’, the interval from ‘30 sec.’
to ‘40 sec.’ and the amount of water from ‘1.5 oz’ (45 ml) to ‘1.0 oz’
(40 ml).
Precondition: ‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/6)’
g T Turn the Rotary Switch until the program item ‘Product set-
tings (2/6)’ is displayed.
T Press the ‘Expert mode’ button.
‘Expert mode’
E Next select the button of the product for which you would like
to make settings. No product is prepared at this point.
T Press the ‘Latte macchiato’ button.
‘Latte macchiato’
T Press the ‘Amount of milk’ button.
T Press the ‘ < ’ or ‘ > ’ button to change setting for the amount
of milk to ‘20 sec.’.
T Press the ‘Save’ button.
‘Saved’ appears briefly on the display.
T Press the ‘Volume’ button.
T Press the ‘ < ’ or ‘ > ’ button to change setting for the fill vol-
ume to ‘1.0 oz’ (40 ml).
T Press the ‘Save’ button.
‘Saved’ appears briefly on the display.
T Press the ‘Next’ button.
T Press the ‘Interval’ button.