Technical data

4 Permanent settings in programming mode

Hot coffee, hot steam and hot water can cause scalding. Scalding is

a serious burn.

T Use extreme care when handling hot liquid or steam.

T Allow liquid to cool down before drinking.

T In the event of scalding, rinse affected area with cold water an

seek medical attention.

T Keep children AWAY.

For a summary of the different temperatures, please refer to Chap-

ter 4 ‘Permanent settings in programming mode – Product settings’.

Press the P button to enter programming mode. You can navigate

through the program items and permanently save the required set-

tings simply by turning the Rotary Switch and using the variable

buttons. The following settings can be made:

Program item Sub-item Explanation

‘Maintenance status

(1/6)’

‘Clean’,

‘Descale’ (only if filter is

not activated),

‘Change the filter’ (only if

filter is activated),

‘Rinse the coffee system’,

‘Clean the milk system’

T Start the required maintenance program

here.

‘Product settings (2/6)’ ‘Expert mode’

T Select your settings for specialty coffees

and hot water.

‘Maintenance settings

(3/6)’

‘Filter’,

‘Water hardness’ (only if

filter is not activated),

‘Rinse the coffee system’,

‘Rinse the milk system’

T Indicate whether you are operating your

IMPRESSA with or without a CLEARYL

Blue filter cartridge.

T Adjust the water hardness.

T Change the settings for the switch-on

rinse and milk system rinse.

J WARNING