Technical data

49
5 Maintenance
T Press the ‘Descale’ button.
T Press the ‘Start’ button.
T Press the ‘Sta
rt’ button again.
‘Empty drip tray.’
T
Empty the drip tray and coffee grounds container and put
them back into the machine
.
‘Pour descaling agent into water tank.’
T
Remove and empty the water tank.
T
Completely dissolve the contents of one blister (3 JURA des-
caling tablets) in a receptacle holding 20 oz (600 ml) of
water. This may take several minutes.
T Pour the solution into the empty water tank and insert it into
the machine.
‘Press the Rotary Switch.’
T
Place one receptacle under the dual spout and another
under the hot-wa
ter spout.
k T Press the Rotary Switch.
‘Machine is being descaled.’, water flows repeatedly out of
the dual spout and the hot-wat
er spout.
The operation stops automatically. ‘Empty drip tray.’ appears
on the displa
y.
T
Empty both receptacles.
T Empty the drip tray and coffee grounds container and put
them back into the machine.
‘Fill water tank.’
T
Remove the water tank and rinse it thoroughly.
T
Fill the water tank with fresh, cold water and reinsert the
tank.
‘Press the Rotary Switch.’
T
Place the receptacles back under the dual spout and the hot-
wat
er spout.
k T Press the Rotary Switch.
‘Machine is being descaled.’, water flows out of the dual
spout and the hot-wat
er spout.
The operation stops automatically. ‘Empty drip tray.’ appears
on the displa
y.