Technical data

33
4 Permanent settings in programming mode
T Press the ‘+’ or ‘–’ button to set the hours.
T Press the ‘Save’ button.
T Press the ‘+’ or ‘–’ butt
on to set the minutes.
T Press the ‘Save
’ button.
‘Saved’ appears briefly on the display.
‘Time / date’
O T
Press the P button to exit programming mode.
‘Please select product:’
In the progr
am item ‘Machine settings (3/5)’ / ‘Timer’ you can set an
individual swit
ch-on and swit
ch-off time for every day of the week.
E Automatic switch-on only works when the machine is switched
on at the power switch.
E For the time format, you can choose between ‘24 hrs’ and
‘AM / PM’ (see Chapter 4 ‘Permanent settings in programming
mode – Units’).
Example: Proceed as follows to set your GIGA to switch on and off
at a time defined by you every day of the week.
Precondition: ‘Please select product:’ is displayed.
O T
Press the P button.
‘Maintenance status (1/5)’
g T
Turn the Rotary Switch until the program item ‘Machine set-
tings (3/5)’
is displayed.
T Press the ‘Timer’ butt
on.
‘Timer’
T
Press the ‘Monday’ butt
on (example).
‘Monday’
T
Press the ‘+’ or ‘–’
button to set the hours (for ‘Switch
machine on’).
T Press the ‘’ butt
on.
T Press the ‘+’ or
‘–’ button to set the minutes (for ‘Switch
machine on’).
T
Press the ‘’ butt
on.
T Press the ‘+’ or
‘–’ button to set the hours (for ‘Switch
machine off’).
T
Press the ‘’ butt
on.
Timer