Technical data

28
4 Permanent settings in programming mode
Product Coffee strength Amount More settings
Two cappuccini,
two caffè latte,
two espressi
macchiati,
two latte macchiati
– Water: 0.5 oz – 8.0 oz
(25 ml – 240 ml)
Milk: 0 sec. – 120 sec.
Milk foam:
0 sec. – 120 sec.
(per cup)
Temperature (low,
normal, high),
grinder on the left and/or
right (as %)
Portion of milk
foam,
portion of milk
– Milk: 0 sec. – 120 sec.
Milk foam:
0 sec. – 120 sec.
–
Two portions of milk
foam,
two portions of milk
– Milk: 0 sec. – 120 sec.
Milk foam:
0 sec. – 120 sec.
(per cup)
–
Hot water – Water: 0.5 oz – 15.0 oz
(25 ml – 450 ml)
Temperature (low,
normal, high)
E In addition to the settings listed, you can reset the values for
all products to the factory settings.
Example: Proceed as follows in the
‘Expert mode’ to change the
amount of milk f
o
r a latt
e macc
hiato from ‘4 sec.’ to ‘6 sec.’, the
amount of milk foam from ‘1
2 sec.’ to ‘14 sec.’ and the amount of
water from
‘1.5 oz’ (45 ml) to ‘1.0 oz’ (40 ml).
Precondition: ‘Please selec
t product:’ is displayed.
O T Press the P button.
‘Maintenanc
e status (1/5)’
g T
Turn the Rotary Switch until the program item ‘Product set-
tings (2/5)’
is displayed.
T Press the ‘Expert mode’ butt
on.
‘Expert mode’
E Nex
t select the button of the product for which you would like
to mak
e settings. No product is prepared at this point.
E You can also select the products in the product selector. To do
this, turn the Rotary Switch to view the product selector.
T Press the ‘Latte macchiato’ button.
T
Press the ‘Amount of milk’
button.