Manual

PLEASE DON'T!
• Never boil water while the lid is open. The kettle will not shut off and
boiling water may splash out of the kettle. This can cause severe
injuries.
• Never try to remove the lid.
• When opening the lid, handle it gently and do not try to push it beyond its
normal resistance. If you break the lid, the kettle will not work properly.
• Never fill kettle with anything but water.
• Do not add instant soups or any other soluble to the kettle.
• Do not use the kettle to thaw food of any kind.
• Do not use the kettle to make sauces or to melt cheese, butter or any
other items.
• Never immerse the kettle in any liquid. Never put kettle or base in the
dishwasher.
BEFORE USING FOR THE FIRST TIME
Read all Important Safeguards and Operating Instructions before using
this kettle. Discard the first filling of boiling water to remove any dust
and residues from the manufacturing process.
TO BOIL WATER
1. Remove kettle from base.
2. Open the lid until it stands vertically. DO NOT BEND LID FURTHER
BACK!
3. Fill with the desired amount of fresh cold water. The kettle has minimum
and maximum markings. Never underfill or overfill the kettle.
CAUTION / DANGEROUS: Never fill above the MAX line. If you fill
above the max line, boiling water will push out of the pouring spout.
This can cause severe injuries and burns.
4. Close lid.
5. Place kettle on Power Base.
6. Plug cord into wall outlet.
7. Gently push the On switch (B), and the blue Indicator Light will turn
on. The kettle begins to heat water.
8. When the water comes to a boil the kettle will turn off automatically,
the switch will disengage and the light will shut off.
9. Lift kettle from base and pour water out slowly. IMPORTANT Open
lid (A) at a 90º angle, when pouring all of the water at once into
another container. This way hot steam will be diverted away from the
hand holding the handle (D).
10. Replace kettle on Power Base.
11. If you want to bring the remaining water to a boil again, repeat step 7.
4.