™ Automatic Milk Frother Model #202.04 600W / 120V~ / 60Hz • Operating Instructions • Warranty Visit capressoblog.
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. READ ALL INSTRUCTIONS. 2. After having the packaging removed, check that the appliance is intact. if in doubt do not use the appliance and contact your sales agent. 3. The parts of the packaging, plastic bags etc. must not be left within the reach of children as they are potential sources of danger. 4. DO NOT touch hot surfaces. Use handles or knobs. 5.
SPECIAL CORD SET INSTRUCTIONS Regarding your Cord Set: A. A short power-supply cord (or detachable power-supply cord) is provided to reduce risks resulting from becoming entangled in or tripping over a longer cord. B. Longer detachable power-supply cords or extension cords are available and may be used if care is exercised in their use. C.
HOW TO REACH CAPRESSO Should you require further information or if particular problems occur that are not covered in this manual, please • CALL our toll free HELP LINE: 1-800-767-3554 Monday -Thursday 8AM to 9PM, Friday 8AM to 8PM and Saturday 9AM to 5PM Eastern Time Zone. • FAX us at 1-201-767-9684 • E-MAIL us at contact@capresso.com • VISIT our website at www.capresso.com Lid Fig.
Using the froth PRO™ The froth PRO™ Automatic Milk Frother comes equipped with a milk pitcher with lid, two frothing disks, one heating disk and the base unit. One of the disks is installed inside the milk pitcher. The other disk and the heating disk are stored underneath the base of the appliance. Heating Disk (smooth) Snaps into bottom of Frothing Cup for heating milk. Stores underneath power base. Frothing Disk (spoked) Snaps into bottom of Frothing Cup for frothing milk. Stores underneath power base.
Hot Frothing and Heating Milk Perfect for hot beverages such as cappuccinos, lattes, hot chocolate, flat whites and milk steamers. 1. Plug in appliance. 2. Remove lid from milk pitcher. (A) 3. Place one of the frothing disks or the heating disk into the bottom of the milk pitcher. Make sure it snaps in. (B) 4. Make sure underside of the milk pitcher is dry. 5. Pour fresh cold milk into the milk pitcher. (C) 6. Replace lid. (D) 7. Place pitcher on heating platform. (E) 8.
Please note: • When you remove the milk pitcher from the appliance during operation, the item will automatically shut off. When replacing the pitcher, you need to push one of the three buttons to start it again. • If the heating plate or the bottom of the milk pitcher is still hot, the appliance may not turn on. In this case, remove the milk pitcher. Cool it down by running it under cold water. Make sure the underside bottom is dry and start over.
LIMITED WARRANTY This warranty covers your Capresso machine Model # 202.04. This warranty is in effect for one year from the date of the first consumer purchase. This warranty covers all defects in materials or workmanship (parts and labor). The warranty does not cover: • Any machine not distributed by Capresso. • Any machine not purchased from an Authorized Capresso Dealer. • Commercial use of the machine.
