Technical data

50
6 Maintenance
STEAM – The nozzle and pipe are cleaned.
l Press any button as soon as the receptacle with the Auto-
Cappuccino Cleaner is empty.
l Rinse the receptacle thoroughly, fill it with 250 ml of fresh
water and immerse the milk pipe in it.
k l Press the steam button.
ä l Turn the Rotary Switch until 60 SEC appears on the
display.
STEAM - The nozzle and pipe are rinsed with fresh water.
l Press any button as soon as the receptacle with the water is
empty.
l Carefully remove the Professional Cappuccino Frother from
the Connector System
©
.
l Disassemble the Professional Cappuccino Frother into its
components.
l Rinse all the nozzle parts thoroughly under running water.
l Reassemble the Professional Cappuccino Frother and attach
it to the Connector System
©
.
The cleaning of the Professional Cappuccino Frother is
finished.
Coffee beans may have a light layer of oil which remains on the walls
of the bean container. These traces may negatively affect the coffee
results. For this reason, clean the bean container from time to
time.
Danger of injury to the fingers when the grinder is running.
l Switch the machine off with the on/off button g before per-
forming any work on the grinder.
l Switch the machine off at the power switch e.
Precondition:
FILL BEANS is displayed.
l Open the cover of the bean container and remove the aroma
preservation cover.
Disassemble
Professional
Cappuccino Frother
Cleaning the bean
container
WARNING