Technical data

49
6 Maintenance
l Turn the selection lever to the milk or milk foam
position.
k l Press the steam button.
HEATING
READY
k l Press the steam button again.
STEAM - The nozzle and pipe are rinsed.
l Press any button as soon as clean water flows into the cup.
To ensure that the Professional Cappuccino Frother works perfectly,
you should clean it daily when you have been preparing milk.
If the wrong cleaning agent is used, the machine could be damaged
and/or traces of detergent could be left behind in the water.
l Use only original JURA care products.
o The IMPRESSA will not prompt you to clean the Professional
Cappuccino Frother.
o The JURA Cappuccino Cleaner is available from your stockist.
@ You can also try out the ‘Clean Professional Cappuccino
Frother’ operation online. Visit the Knowledge Builder
at www.jura.com.
l Place a receptacle under the Professional Cappuccino
Frother.
l Pour 250 ml of fresh water into a container and add one
capful (max. 15 ml) of Auto-Cappuccino Cleaner.
l Immerse the milk pipe in the receptacle.
l Turn the selection lever to the milk or milk foam
position.
k l Press the steam button.
HEATING
READY
k l Press the steam button again.
STEAM
Ä l Turn the Rotary Switch until 60 SEC appears on the
display.
Clean Professional
Cappuccino Frother
CAUTION