Technical data

44
6 Maintenance
l Turn the selection lever of the nozzle to the steam
position
k .
h l Press the maintenance button.
FILTER RINSING - Water will flow out at the nozzle.
o You can interrupt the filter rinsing at any time. To do this, press
any button.
o The water may be slightly discoloured. This is not harmful to
health, nor does it affect the taste.
Filter rinsing stops automatically after approx. 500 ml.
HEATING appears on the display, and then READY
appears.
@ You can also try out ‘changing the filter’ online. Visit the
Knowledge Builder at www.jura.com.
You can initiate the ‘Changing the filter’ operation manually.
Precondition: The filter is activated and
READY appears on the
display.
M l Keep the Rotary Switch pressed until RINSE appears.
M l Press the Rotary Switch to enter the programme item.
RINSE
Ä l Turn the Rotary Switch until FILTER appears.
M l Press the Rotary Switch.
CHANGE
l Continue with the second prompt to take action
(indicated by a
l), as is described under
‘Change following a prompt’.
After 200 coffee preparations or 80 switch-on rinses, the IMPRESSA
will prompt you to clean it.
If the wrong cleaning agent is used, the machine could be damaged
and/or traces of detergent could be left behind in the water.
l Use only original JURA care products.
Manual filter change
Clean machine
CAUTION