Technical data

27
3 Familiarising yourself with the control options
You can make the following settings with the Rotary Switch:
Settings in programming mode always follow the same model.
Programme item Subitem Explanation
RINSE
RINSE
FILTER
CLEAN
DE-SCALE
l Select the desired maintenance programme.
If you don’t take any action, the programming
mode is exited after approx. 5 seconds.
BUTTONS
SELECT BUTTON
l Select your settings for the coffee specialities,
steam and hot water.
FILTER -/√
YES √
NO -
l Indicate whether you operate your IMPRESSA
with or without a CLARIS filter cartridge.
HARDNESS (is only
displayed when the
filter is not activated)
INACTIVE
1° dH – 30°dH
l Adjust the water hardness.
ENERGY -/√
SAVE -
SAVE √
l Select an energy saving mode.
TIME --:--
l Set the time.
UNIT ON --:--
l Set the switch-on time.
OFF AFTER
INACTIVE
0.5 H – 15 H
l Set the switch-off time.
INFO
BUTTONS
CLEAN
DE-SCALE (only when
filter is not activated)
FILTER (only when
filter is activated)
l Keep track of all prepared coffee specialities
and call the care status.
DISPLAY
ML / OZ
24 H / AM PM
l Select the unit of the amount of water and
the time format.
LANGUAGE
l Select your language.
EXIT
l Exit programming mode.