Technical data

19
2 Preparing and using your IMPRESSA for the first time
l Place a receptacle under the coffee spout.
h l Press the maintenance button.
The machine will rinse itself, stopping automatically.
READY appears on the display. Your IMPRESSA is ready to
use.
o After the first time that a coffee speciality has been prepared,
it may happen that
FILL BEANS appears on the display if
the grinder has not yet been completely filled with coffee
beans. In that case, prepare a different coffee speciality.
Your IMPRESSA no longer has to be de-scaled if you use the CLARIS
filter cartridge.
o Perform the ‘Insert filter’ operation without interruptions. This
will ensure that your IMPRESSA always produces its best.
o After two months, the filter will cease to work. Monitor the
elapsed time as shown on the date plate on the cartridge
holder.
@ You can also try out the ‘Insert filter’ operation online. Visit the
Knowledge Builder at www.jura.com.
Precondition:
READY appears on the display.
m l Keep the Rotary Switch pressed until, RINSE appears on
the display.
ä l Turn the Rotary Switch until FILTER - appears.
m l Press the Rotary Switch to enter the programme item.
NO - appears on the display.
ä l Turn the Rotary Switch until YES appears.
m l Press the Rotary Switch to confirm this setting.
OK appears briefly on the display to confirm the setting.
INSERT, the maintenance button h lights up.
l Remove the CLARIS filter cartridge and the filter cartridge
extension from the Welcome Pack.
l Stick the extension on top of the filter cartridge.
l Remove the water tank and empty it.
Inserting filter and
activating