Installation and Care Guide VER150 Contact Caple on 0117 938 7420 for spare parts or www.caple.co.
I N STA L L ATI O N G U I DE Thank you for purchasing your Caple sink. This sink have been manufactured with the finest quality stainless steel and inspected to exacting standards and is guaranteed to give years of trouble free operation providing our care and installation guidelines have been followed. 1 2 [01] Place the sink upside down in the position where it is to be installed, and trace the outline of the sink on the worktop with a pencil.
[01] x 1 [02] x 2 [03] x 12 3 4 The corners radius are to be 10mm. Cut a hole in the worktop following this second inner line. Alternatively use the template provided with the sink. 25-40mm 20-25mm 7 Using the fixing clips provided, secure the sink to the worktop by clipping these into the brackets under the sink, and screwing until the clip is tight against the worktop as shown.
S I N K M A I N T E N A N C E T I P S – S TA I N L E S S S T E E L S I N K S - By following these maintenance tips, you can maintain the finish of your stainless steel sink for longer: - Scratching on the surface of sinks will occur over time through normal usage. Scratches cannot be removed only made less noticeable by using stainless steel polishing creams and cleaning products. The best form of maintenance is frequent, regular cleaning.
