Specifications

23
Electrical/Optical Characteristics -40°C to +85°C; 4.75 V ≤Supply Voltage ≤5.25 V,
R
LOAD
= 511 Ω, Fiber sizes with core diameter ≤100 µm, and N.A. ≤-0.35 unless otherwise specified
Parameter Symbol Min. Typ.
[2]
Max. Units Conditions Reference
Responsivity R
P
5.3 7 9.6 mV/µWT
A
= 25°C Note 3, 4
@ 820 nm, 50 MHz Figure 16
4.5 11.5 mV/µW @ 820 nm, 50 MHz
RMS Output Noise V
NO
0.40 0.59 mV Bandwidth Filtered Note 5
Voltage @ 75 MHz
P
R
= 0 µW
0.70 mV Unfiltered Bandwidth Figure 13
P
R
= 0 µW
Equivalent Input P
N
Bandwidth Filtered
Optical Noise Power @ 75 MHz
(RMS)
Optical Input Power P
R
-7.6 dBm pk T
A
= 25°C Figure 14
175 µW pk Note 6
-8.2 dBm pk
150 µW pk
Output Impedance Z
o
30 Ω Test Frequency =
50 MHz
dc Output Voltage V
o dc
-4.2 -3.1 -2.4 V P
R
= 0 µW
Power Supply Current I
EE
915mAR
LOAD
= 510 Ω
Equivalent N.A. NA 0.35
Equivalent Diameter D 324 µm Note 7
Absolute Maximum Ratings
Parameter Symbol Min. Max. Units Reference
Storage Temperature T
S
-55 +85 °C
Operating Temperature T
A
-40 +85 °C
Lead Soldering Cycle Temp. +260 °C Note 1
Time 10 s
Supply Voltage V
CC
-0.5 6.0 V
Output Current I
O
25 mA
Signal Pin Voltage V
SIG
-0.5 V
CC
V
(Overdrive)
µW
0.065
0.050
dBm
-41.4
-43.0
CAUTION: The small junction sizes inherent to the design of these components increase the components’
susceptibility to damage from electrostatic discharge (ESD). It is advised that normal static precautions be
taken in handling and assembly of these components to prevent damage and/or degradation which may be
induced by ESD.