Specifications

2
HFBR-0400 Series Part Number Guide
HFBR X4XXaa
1 = Transmitter Option T (Threaded Port Option)
2 = Receiver Option C (Conductive Port Receiver Option)
Option M (Metal Port Option)
4 = 820 nm Transmitter and Option K (Kinked Lead Option)
Receiver Products TA = Square pinout/straight lead
TB = Square pinout/bent leads
0 = SMA, Housed HA = Diamond pinout/straight leads
1 = ST, Housed HB = Diamond pinout/bent leads
2 = FC, Housed
E = SC, Housed 2 = Tx, Standard Power
3 = SMA Port, 90 deg. Bent Leads 4 = Tx, High Power
4 = ST Port, 90 deg. Bent Leads 2 = Rx, 5 MBd, TTL Output
5 = SMA Port, Straight Leads 6 = Rx, 125 MHz, Analog Output
6 = ST Port, Straight Leads
LINK SELECTION GUIDE
Data Rate (MBd) Distance (m) Transmitter Receiver Fiber Size (µm) Evaluation Kit
5 1500 HFBR-14X2 HFBR-24X2 200 HCS N/A
5 2000 HFBR-14X4 HFBR-24X2 62.5/125 HFBR-04X0
20 2700 HFBR-14X4 HFBR-24X6 62.5/125 HFBR-0414,
HFBR-0463
32 2200 HFBR-14X4 HFBR-24X6 62.5/125 HFBR-0414
55 1400 HFBR-14X4 HFBR-24X6 62.5/125 HFBR-0414
125 700 HFBR-14X4 HFBR-24X6 62.5/125 HFBR-0416
155 600 HFBR-14X4 HFBR-24X6 62.5/125 HFBR-0416
175 500 HFBR-14X4 HFBR-24X6 62.5/125 HFBR-0416
For additional information on specific links see the following individual link descriptions. Distances measured over temperature range
from 0 to 70°C.
Applications Support
Guide
This section gives the designer
information necessary to use the
HFBR-0400 series components to
make a functional fiber-optic
transceiver. HP offers a wide
selection of evaluation kits for
hands-on experience with fiber-
optic products as well as a wide
Application Literature
Title Description
HFBR-0400 Series Transmitter & Receiver Reliability Data
Reliability Data
Application Bulletin 73 Low Cost Fiber Optic Transmitter & Receiver Interface Circuits
Application Bulletin 78 Low Cost Fiber Optic Links for Digital Applications up to 155 MBd
Application Note 1038 Complete Fiber Solutions for IEEE 802.3 FOIRL, 10Base-FB and 10 Base-FL
Application Note 1065 Complete Solutions for IEEE 802.5J Fiber-Optic Token Ring
Application Note 1073 HFBR-0319 Test Fixture for 1X9 Fiber Optic Transceivers
Application Note 1086 Optical Fiber Interconnections in Telecommunication Products
Contact your local HP components sales office to obtain these publications or download directly from the
World Wide Web @ http: //www.hp.com/go/fiber/
range of application notes com-
plete with circuit diagrams and
board layouts. Furthermore, HP’s
application support group is
always ready to assist with any
design consideration.