User`s guide

Control Panel
1
1-32 bizhub 215
1.13
Introduction Chapter 1
1.13 Control Panel
Name and function of each component of the Control Panel
The Control Panel has a Display area that displays messages and hardware keys such as Start and
Clear/Stop. This section describes the functions of these keys.
No. Name Function
1 Mixed Original Press this key to specify the mixed original mode.
2 Utility In the Utility screen, you can configure the following settings:
Machine setting, paper source setup, custom size memory,
drum dehumidify, admin. management, copy setting 1, and copy
setting 2, dial registration, fax registration, fax tx operation, fax rx
operation, reporting, scan setting
3 Display Displays the number of copies, zoom ratio, Utility screen, icons,
and error messages.
4 +, ,, *, )
OK
Use +, ,, *, or ) to move an option item in the Display or to
change settings.
Press OK to determine settings.
5 Back Press this key to return to the previous screen.
6 Error This lamp lights up or flashes when an error occurs.
7 Function Press this key to configure the advanced copy settings such as
copying with a binding position.
8 Density Press this key to specify the density with which to scan the original
to be copied.
9 Quality Press this key to select the image quality of the original from
[TEXT], [PHOTO], and [TEXT/PHOTO].
10 Zoom Press this key to enlarge or reduce an image in copy mode.
11 Paper Press this key to select a paper tray to be used.
12 Mode Memory Press this key to register or recall the configured copy function.
13 Confirm Press this key to confirm the counter or communication result, or
print out a report.
14 ID Copy Press this key to copy the contents of the front and back sides of
a card-size original such as a driver's license, onto one sheet.
15 Combine Original Press this key to copy a multi-page original onto one sheet.
16 Finishing Press this key to select the copy finishing mode.
17 Simplex/Duplex Press this key to use the 1-sided or 2-sided printing function.