User`s guide

Sending scanned data
5
5-4 bizhub 215
5.1
Using as a Scanner Chapter 5
Sending scanned data to the FTP/SMB server
The following describes the procedure for sending scanned data to the FTP/SMB server.
1 Press Scan.
2 Load the original.
% For details on how to load the original, refer to page 1-37.
3 Specify the resolution setting.
% Use +, to select the correct setting, then press OK.
% Select [150e150dpi], [300e300dpi], or [600e600dpi].
% When [Color] or [Gray] is specified for the color setting, [600e600dpi] is not displayed.
4 Specify the color setting.
% Use +, to select the correct setting, then press OK.
% Select [BW], [GRAY], or [COLOR].
% If [BW] is selected with [Image Format] set to [JPEG], [PDF] is automatically selected.
5 Specify the image quality.
% Use +, to select the correct setting, then press OK.
% Select [TEXT/PHOTO], [TEXT], or [PHOTO].