User`s guide

Sending scanned data
5
5-2 bizhub 215
5.1
Using as a Scanner Chapter 5
5 Using as a Scanner
5.1 Sending scanned data
Scanned data can be sent via an E-mail or to the FTP or SMB server.
To send scanned data, Extended Operation Panel MK-733 combined with Network Card NC-504 or Im-
age Controller IC-209 is required.
Sending an E-mail
The following describes the procedure for sending scanned data via an E-mail.
1 Press Scan.
2 Load the original.
% For details on how to load the original, refer to page 1-37.
3 Specify the resolution setting.
% Use +, to select the correct setting, then press OK.
% Select [150e150dpi], [300e300dpi], or [600e600dpi].
% When [Color] or [Gray] is specified for the color setting, [600e600dpi] is not displayed.
4 Specify the color setting.
% Use +, to select the correct setting, then press OK.
% Select [BW], [GRAY], or [COLOR].
% If [BW] is selected with [Image Format] set to [JPEG], [PDF] is automatically selected.