Instruction Manual

Instruction manual CCH18

Please keep this instruction manual for future reference

REPLACING THE BULB

NOTE:

The lights must be replaced by a qualiﬁed person.

1. Switch off and unplug the extractor

2. Remove the aluminium grease ﬁlter

3. Remove the LED light by squeezing the metal clips.

4. Remove the clip cover by removing the lid (see image a.)

5. Unclip the light ﬁxing (b.) and remove.

6. Replace the light with the same rated LED ﬁtting by following these instructions in reverse.

























  

1. Switch off and unplug the extractor

2. Remove the aluminium grease filter

3. Remove the LED light by squeezing the metal clips

4. Remove the clip cover by removing the lid (see

image a.)

5. Unclip the light fixing (b.) and remove

6. Replace the light with the same rated LED fitting

by following these instructions in reverse.

LIGHT SOURCE ENERGY CLASS

This product contains a light source of energy efﬁciency class G.