Product specifications

2012 SAMSUNG System Air Conditioner
25
2012 SAMSUNG System Air Conditioner
24
Premium Quality Control Heat Recovery Comfortable Operation
Top Heating Performance at
Low Ambient Temperature
DVM PLUS IV applies highly advanced technologies such
as a super condenser, PHE intercooler, and Vapor Injection
to achieve better heating performance, even at low ambient
temperatures of -10
O
C.
Heating Performance Comparison
Stable Heating Operation
DVM PLUS IV provides stable heating performance by constant operating in heating mode, even when the outdoor unit recovers oil.
competitor's outdoor units cease heating operation while they recover oil.
Company A
Performance Backup Function
While the outdoor unit is in oil balancing control
operation, compressors that are not affected by this
operation will keep operating in heating mode to
minimize any reduction in performance.
䋪
Heating mode stops when the outdoor units recover oil, thus decreasing the indoor temperature.
䋪
Heating mode maintains the indoor temperature, even during recovery operation.
䋪
Comparison is based on 10HP model.
143%
100%
182%
100%
SAMSUNG
Company A
Heating Performance
Heating Efficiency
SAMSUNG
Company A
89Kg
26Kg
SAMSUNG
Company A
1577
209
195
635
726
469
SAMSUNG
Company A
32%
Smaller
71%
Lighter
MCU Kit
DVM PLUS IV HR uses an MCU kit that is 32% smaller than
our competitor’s. The MCU has an internal On/Off valve that
enables fine control through the EEV valve control, and sub-
cooler also supports fine-tuned control. Enjoy a pleasant
temperature controlled environment through improved
performance and reduced noise.
Simultaneous Cooling and Heating
Single outdoor units can operate all the indoor units in both cooling and heating mode.
They can also simultaneously operate in cooling and heating mode when it is necessary to provide more freedom for operation.
MCU Kit
Hotel
Office
Hospital
Cooling
Heating
Cooling operation for indoor environments
where cooling load occurs all year round due to
devices and lighting that generate heat.
Heating operation for indoor
environments where heating
load occurs due to the outdoor
environment.
Recommended Sites
Weight ComparisonVolume Comparison
MCU Kit