Specifications

29
High Performance Liquid Chromatograph
Valve Options
Option Box VP can house up to two FCV-11AL(S)/12AH/13AL/14AH units. One FCV-11AL or FCV-11ALS unit, up
to two FCV-12AH units, up to two FCV-13AL/14AH units, and one DGU-10B unit can be controlled from the
CBM-20A or SCL-10AVP via Option Box VP.
Sub-controller VP has the same control functions as Option Box VP but has no housing capability.
Using a solvent recycle valve kit during isocratic analysis allows column eluent to return to the reservoir bottle
when no peaks are detected according to the set threshold level. This helps reduce consumption of the mobile
phase, especially at higher flow rates.
This manual switching valve is used to perform recycling operations with preparative systems.
This manual switching valve is used to switch between preparative columns, or between a preparative column
and an analytical column, in an analytical-to-preparative scaleup system.
Other Options
The sturdy plastic tray will hold up to seven 1-liter reservoir bottles.
This unit provides eight outlets (4 unswitchable, 4 switchable by CBM-20A).
This holder supports the mounting of two columns (SLIM: Second column is optional.*)
with inner diameters in the range of 20 to 50 mm, one analytical column, maximum four
manual selection valves of various types (SLIM: Maximum five).
Dimensions: Column Holder W250 × D400 × H465 mm
Column Holder, SLIM W110 × D500 × H625 mm
* Optional column clamp ASSY (228-17701-94) is required separately to mount two columns.
Column Holder Column Holder, SLIM
(228-45060-91)
Option Box VP
(228-45080-91)
Solvent Recycle Valve Kit
(228-20401-92)
Manual Recycle Valve
(228-13000-95)
Manual Column Switching Valve
(228-45041-91)
Reservoir Tray
(228-35327-XX)
Outlet Unit
(228-35308-91)
Sub-controller VP
(228-45079-91)
Column Holder
(228-45203-41)
Column Holder, SLIM
* Option Box VP is shown in
the photograph.