Specifications

15
www.ittcannon.com
Specifications and dimensions subject to change
PanelDrainconnectorsaresuppliedfullyassembledwiththefemalecontacthavinganM12threadedpost,
withnutandspringwasherforconnectiontoastandardcablelug.Theseconnectorsratedeither400amp
(T4)or660amp (T6). Thisconnectoris fitted withthesecondarylocking pin for secureconnections,see
explanationonLineDrainpage13.
Thestandardconnectorismountedtoapanelthrough4fixingholeson
theflange,panelcut-outdetailsareshownontheright.Asanalternative,
theflangeholescanbepre-fittedwithM6threadedinsertsforeitherfront
orrearfixing,addsuffixM6FforfrontfittingorM6Rforrearfitting(rear
mounting may obscure the product label, maximum panel thickness
4mm).
NeopreneGasketstosealtheflangeagainstapanelareavailabletoorder
separately,orderpartnumberA2499001150.
Ifrequired,theconnectorcanalsobesupplied
withoutaflange(specialoptionsuffix–NF).
Orderinginformation–seepage11forfulldetailsoftheoptionsavailable
NPDFT – X – XX – L – XX – XXX
Line & Color
Contact
Special Options
M6F M6 threaded insert front mounting
M6R M6 threaded insert rear mounting
NF No Flange
Panelconnectorscanalsobesuppliedwithanun-assembledcrimporSet-Screwcontact.Inthiscasethe
contact is fitted to the cable, and must be assembled to the insulator body before the fully assembled
connector is fitted to the panel.  This is a non-standard option, please contact your supplier for further
information.
4 HOLES ø 5.50mm
42.50
42.50
47.00
Threaded Insert
Gasket
Panel Cutout
Examplepartnumber:
NPDFT-3-BL-L-T6
VEAM PowerLock
Panel Drain