Specifications

14
www.ittcannon.com
Specifications and dimensions subject to change
Panel Source connectors are supplied fully assembled with the male contact
havinganM12threadedpost,withnutandspringwasherforconnectiontoa
standardcablelug,orM12threadedholeforfixingwithabolt.Theseconnectors
The standard connector is mounted to a panel through 4 fixing holes on the
flange,panelcut-outdetailsareshownontheright.Asanalternative,theflange
holescanbepre-fittedwithM6threadedinsertsforeitherfrontorrearfixing,
add suffix M6F for front fitting or M6R for rear fitting (rear mounting may
obscuretheproductlabel,maximumpanelthickness4mm).
ASlidingCollarcanbefittedtothe
source connector which allows a
pairofconnectorstobedisconnect-
ed without the use of a separate
releasekey.
Ordersuffix=SC
Orderinginformation–seepage11forfulldetailsoftheoptionsavailable
NPS – X – XX – XX – XX
Line & Color
Contact
Special Options
M6F M6 threaded insert front mounting
M6R M6 threaded insert rear mounting
NF No Flange
SC Sliding Collar
Panel connectors can also be supplied with an un-assembled crimp or set-screw contact. In this case the
contactisfittedtothecable,andmustbeassembledtotheinsulatorbodybeforethefullyassembledconnec-
torisfittedtothepanel.Thisisanon-standardoption,pleasecontactyoursupplierforfurtherinformation.
4 HOLES ø 5.50mm
42.50
42.50
44.00
Threaded Insert
Gasket
Examplepartnumber:
NPS-N-BL-T4
VEAM PowerLock
Panel Source
Threadedpostversionshown
Panel Cutout
Neoprene Gaskets to seal the flange against a panel are available to order
separately,orderpartnumberA2499001150.
Ifrequired,theconnectorcanalsobesuppliedwithoutaflange(specialoption
suffix–NF).
areratedeither400amp(T4/H4)or660amp(T6/H6).