Specifications

12
www.ittcannon.com
LineSourceistheconnectorwithamalecontactwhichisnormallyconnectedtothesourceofthepower.The
contactsarefittedwithaplasticendcapthatpreventsaccidentalfingertouchingoflivepartsoftheconnector
andmeetsIP2Xrequirements.Differentcontactsareavailabletosuitcableconductorsfrom25mm²to300mm².
Connectors rated either 400 amp or 660 amp, can be fitted to a wide range of
coppercables,andtoaluminiumcablesonrequest.
The 400 amp connectors use a standard set-screw contact suitable for 120mm²
conductors; when using smaller conductors a range of reduction sleeves are
available to order separately that can be used with cables down to 25mm²,  see
page11forfurtherinformation.
660amp contactsarecrimpedusingindustrystandardcrimpingtoolsanddies,a
rangeofcontactsareavailabletosuitcablesfrom35mm²to300mm²
CableglandsmeetingIP67requirementsarefittedtotheconnectors,4sizesareavailablethatcoverarangeof
cables with outside diameters from 15mm to 38mm.  When selecting the M50 gland, please note that this is
suppliedwithanadaptor(notshownabove)thatstepstheconnectorupfromM40toM50.
A Sliding Collar can be factory fitted to the source
connector which allows a pair of connectors to be
disconnected without the use of a separate release
key.
Rubber hand grips are available that fit over the
ribbedsectionofthemaininsulatorbody,thesegrips
assistwiththehandlingoftheconnectorswhenbeing
usedindifficultconditions.
Ordersuffix=SC
Ordersuffix=HG
Orderinginformation–seepage11forfulldetailsoftheoptionsavailable
NLS – X – XX – XXXX – MXXX – XX
Line & Color
Contact
Cable Gland Special Options
HG Hand Grip
SC Sliding Collar
Examplepartnumber:
NLS-1-BN-S120-M40A
Specifications and dimensions subject to change
VEAM PowerLock
Line Source