Specifications

lighting your grill
part 1
14
If you are certain that no leaks are detected
and there is no odor of gas, and you are
certain that all knobs are in the OFF
position, and grill does not light, please
check that there is gas in the tank.
Sometimes it's easy to overlook this small
detail. If there is gas and the grill is not
lighting, call your installer to check the
connections. And please, always keep
your face and body as far away as possible
from the grill when lighting.
BEFORE YOU START, CHECK CONNECTIONS:
Before lighting the grill, check that the pressure regulator and hose
assembly supplied with the unit is installed. The replacement pressure
regulators and hose assembly must be the type specified by us, the
manufacturer, and the installer MUST have performed all leak tests, burner
adjustments, air shutter adjustments, electrical connections and MUST
leave the checklist with you before you attempt to light the grill.
Do not use the grill if the odor of gas is present at ANY TIME. Make sure
all knobs are in the OFF position. If the unit is LP and you smell gas, make
sure that gas pressure regulator is correctly installed into the tank and leak
check the hose and regulator connections with a soap and water solution
before operating the grill. If you are confident that no leak is detected, turn
on the gas supply. If you are at all unsure, please contact your installer
and have him check the connections for leaks.
WARNING!
• DO NOT leave the grill unattended
while cooking.
• KEEP a spray bottle of soapy water
near the gas supply valve and check
the connections before each use.
• DO NOT attempt to “Light” the grill if
odor of gas is detected.
• WAIT five minutes before relighting a
hot grill.
LIGHTING THE "W" GRILL BURNERS:
Open the grill lid. Make sure all knobs are in the
OFF position. Turn the main gas supply on. If you
smell gas, shut-off gas-supply and contact your
installer. If you do not smell gas and you are
POSITIVE that all connections are properly sealed
and free of leaks, turn the left main burner to the
LITE position. You will hear the flow of gas through
the manifold. Immediately push and hold the ignition
button, turn the selected burner knob to HI. If the
burner does not light within 4 to 5 seconds, turn knob
OFF and wait 5 minutes before trying again for any
accumulated gas to dissipate.
IMPORTANT!
YOUR SAFETY IS THE MOST IMPORTANT
CONSIDERATION TO GIVE WHEN LIGHTING A
GRILL. Keep children and pets away from grill
while lighting. Keep hands and face away from
the interior of the grill when lighting!
A.
B.