USER MANUAL SMART SHOPPING CART Model 2 EN Caper – V011.0 Copyright © 2021-2022 Instacart Inc.
TABLE OF CONENTS IMPORTANT SAFETY INSTRUCTIONS ....................................................................................... 3 Read All INSTRUCTIONS BEFORE USE ........................................................................................... 3 Technical Safety........................................................................................................................ 4 Operation Safety…………………………………………………………………………………………………………………4 Charging Safety ................................
IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USE The following safety guidelines are intended to prevent unforeseen risks or damage from unsafe or incorrect operation of the device. The guidelines are separated into “WARNINGS” and “CAUTION” as described below. This symbol is displayed to indicate matters and opearations that can cause risk. Read the part with this symbol carefully and follow the instructions in order to avoid risk.
Technical Safety • This product can be used by children aged from 12 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instructions concerning use of the device in a safe way and understand the hazards involved. Children shall not play with the device. Cleaning and user maintenance shall not be made by children even with supervision.
Charging Safety • Do not modify the power plug provided with the product. If it does not fit the outlet, please talk with manufacturer and replace the defect power plug, or have a proper outlet installed by a qualified electrician. • Do not use other power adapters to charge the device except the ones provided with the product. • Do not try to move the device while charging. Make sure all charging cables are disconnected before anyone attempt to take the device out of its charging area.
Maintenance Safety • Disconnect the device from the power supply (power cable and battery) before cleaning the device. Turn off the switch does not disconnect the device from power supply. • Do not repair or replace any part of the device. All repairs and servicing must be performed by qualified service personnel unless specifically recommended in this User’s Manual. • Use only authorized factory parts or tools for maintenance. • Do not spray water inside or outside the device to clean it.
SPECIFICATIONS & DIMENSIONS ● Appearance and specifications may change without notice to improve the quality of the product.
Top Module 2 1 3 11 4 10 5 9 6 8 7 1 Payment Terminal 5 Barcode Scanner 9 Top unit encasing 2 LCD touch screen 6 Personal Basket 10 Side LED indicator 3 Produce - Camera 7 Cup holder 11 IR sensor lens 4 Side LED Indicator 8 Handrail 8
Top View Dimensions W1 560 mm W2 322.6 mm W3 580 mm W4 516 mm W5 261.3 mm W6 358.
Side View Dimension H1 1156 mm H2 1040 mm H3 929 mm H4 496 mm L1 993 mm L2 1118 mm 10
Five cart stacking dimensions A 2718.
Specifications CPU Operating System Charger input voltage Charging condition Battery output Battery life Battery capacity Charging time Switch – bottom unit Switch – top unit Speaker Wheels Indicators Main CV Camera Produce Camera Wi-Fi standard Wi-Fi distance Barcode Barcode scanning angle Barcode resolution Display Weight scale Weight accuracy? Load Cell Operating Temperature Operating Humidity Debug Port AIOC3399 Android AC100V∽240V DC24V,6.
Extra Options and Functions This feature is only available if client choose to install specific accessories and services.
OPERATIONS 1 - Basic Shopping - Transaction Overview 1. Shopper taps on “Start Shopping!” Button 2. Shopper goes through Onboarding Tutorial by tapping "NEXT" 3. At the end of tutorial, shopper taps “I’m Ready” to begin shopping. 4. Shopper takes any item and puts it in the cart. Barcode must be clearly visible to any of the cameras facing the inside of the cart 5. Item is successfully added to the shopping list.
2 - Add Produce and PLU items A. Adding by Quantity Steps 1. Shopper starts on Shopping Home screen 2. Shopper taps on “Add Item Without Barcode” 3. Shopper searches for item by PLU or Name 4. Shopper puts produce into the cart 5. Cart stabilizes and calculates weight of the produce 6. Shopper confirms calculated price 7.
B. Adding by Weights Steps 1. Shopper starts on Shopping Home screen 2. Shopper taps on “Add Item Without Barcode” 3. Shopper searches for item by PLU or Name 4. Shopper puts produce into the cart 5. Cart stabilizes and calculates weight of the produce 6. Shopper confirms calculated price 7.
3 - Removing Items from the Shopping List A. Removing Items Directly from the Cart 1. Items can be removed directly from the cart. The cart uses computer vision and weight logic to determine what has been taken out of the cart. 2. Item card will be automatically removed from the shopping list. *If the cart cannot confirm what was removed, shopper will be prompted with a "Multi-Match Removal" screen to manually choose what was removed from the cart.
B. Removing by Tapping “Trash” Icon 1. Items can also be removed by first tapping on the trash can icon next to the item name on your shopping list. 2. Shopper will be prompted to take item out of your cart. 3. Item can be removed from the cart 4. Cart will use its computer vision and weight logic to confirm removal of item. 5. Item card will be automatically removed from the shopping list.
4 – Checking Out 1. When shopper is done shopping, shopper taps “Checkout” 2. Shopper is directed to make their way to checkout area. 3. Shopper taps "Pay for Cart" 4. Shopper confirms prices and taps "Pay $__." 5. Shopper instructed to insert or swipe credit card into card reader 6. Payment is successful when shopper sees "Payment Success" screen. 7. Shopper is automatically led to Rating Screen and is allowed to rate their experience or skip directly to the receipt. 8.
5 – Staff Audit 1. Store Admin reaches shopping home screen. 2. Admin taps on "HELP" on the top right corner of the screen 3. Admin taps on "Person" icon 4. Admin logs in with following information Username/Password: Please inquire Caper staff 5. Store Admin allowed to resolve any cart issues including: resolving auditrequired items, transferring to cashier, and starting over transaction.
MAINTENANCE WARNING • Unplug the device before cleaning to avoid the risk of electric shock. Failure to follow this warning may results in serious injury, fire, electric shock, or death. • Never use harsh chemicals, abrasive cleaners, or solvents to Cleaning SOP: They may damage the finish. clean the device. 1. 2. 3. 4. 5. 6.
TROUBLESHOOTING Operation of the device can lead to errors and malfunctions. The following tables contain possible causes and notes for resolving an error message or malfunction. Before Calling for Service As a trained staff, you can remedy most of the problems by yourself. NOT every trouble you encountered need to call Caper service center. The following table should assist you by troubleshooting.
LEGAL AND REGULATION The E-label FCC Identifier will be displayed on the device’s built-in display. Products with a built-in display, or that only operate in conjunction with another product that has an electronic display, have the option to display on the electronic display the FCC Identifier, any warning statements, or other information that the Commission’s rules would otherwise require to be shown on a physical label attached to the device (See 47 CFR § 2.
FCC STATEMENT: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
