User guide

using the AM/FM radio
In this section we will walk you through the steps for selecting reception band, selecting stations and
how to save preset channels.
For a step-by-step video describing this section, scan the QR code with your smartphone app
or visit www.hellocapello.com/weather-radio-video/#7
There is a digital AM/FM radio built into the All Hazards Weather Alert Radio. Listen to news, sports, music and more without disrupting the
weather radio functions. If an alert is broadcast, the radio automatically switches from the AM/FM mode to the weather radio alert functions.
Power and Band Selection

While power switch is “ON,” press button to activate the AM/FM radio.

Press button switch from “WEATHER” to “FM” or “AM” bands as indicated on the display.
Selecting Stations

Press or arrow to scan through local radio stations. When you nd a station you like, stop pressing the arrow
and the radio will stay on that station.

Press and hold or arrow to Auto-scan for available stations.
Programming Preset AM/FM Channels
You can program up to 10 AM and 10 FM radio stations into the radio’s memory. To program a memory channel, do the following:

Turn on radio on and use the or arrows to tune to the desired station frequency.

Press and hold the button for a few seconds until the MEMORY NUMBER (1-0) ashes on the display.

Use the or arrows to choose the desired memory channel number you wish to program, up to 10 each for AM and FM stations.

Press to save your frequency selection to the chosen memory channel.
RADIO / SNOOZE
BAND
PRESET