User guide
aux-in connection
Insert one end of the 3.5mm audio cable (not included) into the LINE OUT jack on your external audio device
(e.g. iPad, iPod shufe, mobile phone, MP3 player, digital media player, etc.) and the other end into the
LINE IN jack on the unit.
To listen to the external audio unit, turn this unit on using the POWER button and turn on the external audio unit.
The unit will automatically switch to AUX mode when Line in audio cable is plugged in to the unit. The display
will show “AUX In ” indicator and the clock time. Sound from the external audio unit will be heard through this
unit's speakers.
If you wish to listen to radio source, pull out the end of 3.5mm audio cable from AUX IN Jack, the unit will
switch back to radio mode.
notes: When the Alarm wakes and set to FM source, at that time the unit doesn't switch to AUX mode even
though you plug in the audio cable to this unit, until you stop the Alarm and power on the unit again, then will
switch to AUX mode if audio cable is still connecting