Installation & Assembly

KIT INSTALLATION GUIDE
DELIVERY IS OFFERED
or Materials can t in a
Truck, SUV, or Van
Using Timberloks™ in Hardware Pack, aach a
cedar post to large wall. Make sure the rainguard
is on top (wider board).
For Above Ground: Important p to remember is to
decide how high o the ground you want the kit
posioned. Make sure panel is ush to inside when
mounng to post. Note: Kits are Pre-Drilled.
Add another cedar post
to the other side of the
large wall. Be sure both
posts are aligned proper-
ly with each other.
Next: Do the same for
another large wall
aaching 1 post only.
Important:
*Make sure all panels are
level using a leveler.
Take your 2 Large Wall Panels, one
with 2 posts and one with 1 post and
drill them together.
A helpful p here is to use a block
that matches your desired kit height
(from ground to boom of the walls)
as a staging piece when making the 90
degree connecon.
Blue line shows a block to aid with
install of 2 large walls.
Deluxe Installaon
Above Ground & House Mount 8’ Posts are used
Always make sure inside of panels
are ushed to inside of the post.
Again, make sure all
panels are level.
CORNER BRACES:
Use these to make square and to provide
support. Screws are not part of the pack for
braces but any old screw in the house will do.
7