Installation & Assembly

KIT INSTALLATION GUIDE

DELIVERY IS OFFERED

or Materials can t in a

Truck, SUV, or Van.

Choose your cedar posts and pick the best end for

the top. Use a block or item to be reference for

height for all posts. For Above Ground: Important p

to remember is to decide how high o the ground

you want the kit posioned. Kits are Pre-Drilled.

Our walls are built with

rain guards. These will be

the wider boards of the

structure built in to the

top of the wall. This part

of the wall will be the top.

With the Pre-Drilled holes as reference use the

Timberlocks™ in your Hardware Pack and connect

a large wall to a cedar post. Make sure the inside

of the wall is ush to the cedar post. Repeat for the

second large wall.

Next, aach one wall to the house. Always mak-

ing sure the wall is level. Then, measure one of the

walls as reference to use for the space along the

back side of the house for house mounng.

Standard Installaon

Above Ground & House Mount 8’ Posts are used

Complete the second wall mount.

Make sure the distance from the 1st

wall mount is the right size (size of

the wall panel) and level. Use a refer-

ence point against the wall or mark

of with a pen / marker.

Then, install the second wall and

make sure it is level.